Arduino IDE – The First Layer https://thefirstlayer.com Exploring the world of 3D printing Tue, 16 Feb 2021 20:36:38 +0000 en-US hourly 1 https://wordpress.org/?v=5.9.7 https://thefirstlayer.com/wp-content/uploads/2018/07/nozzle-diameter-nozzle-size-layer-thickness-layer-thickness-icon-100x100.png Arduino IDE – The First Layer https://thefirstlayer.com 32 32 TFL Live: Ask for HELP – February 14, 2021 https://thefirstlayer.com/tfl-live-ask-for-help-february-14-2021/ Tue, 16 Feb 2021 20:28:06 +0000 https://thefirstlayer.com/?p=1324
What are some of the questions were answered this week?

In “vase mode” using Cura. What I can do to find a balance between time to print and thickness of the vase. Is there a trick? 

If you have a new out of the box printer, you want to change the nozzle, do you need to heat up the nozzle still or can it be done cold?

I’m replacing a part cooling fan on E3V2. Existing wiring is blue/yellow. New fan is black/red. Which goes to which? 

CR10s is having adhesion problems and print curling? What most likely is the problem?

Trying to create a flat 1mm rectangular sheet with some rows of evenly spaced 8mm holes no thicker than the sheet, but with strength on each circumference. Can I manage that with Matter tools?

]]>